PHS2X2-4/0-500 B
CA$0.00
The PHS2X2-4/0-500 B Piranha™ is a general purpose
multi-port waterproof insulation piercing connector,
ideal for use in wet areas or in areas subject to casual
submersion (i.e. connection pits, hand-holes and manholes).
It will provide parallel in-line waterproof
connection for four single core cables without the need
to strip the cable or apply heat-shrink, resins or gels.
Fully insulated, no exposed live parts.
One-piece, thermoplastic rubber over-moulding
provides long-lasting water-tight seals.
All seals are pre-greased with silicone grease.
Fully insulated, rugged 3/4” AF plastic shear-head
bolts suitable for installation with a battery
operated impact wrench.
UV stabilised over-moulding. Can be used in both
overhead and underground applications.
No stripping of cables required.
No gels, resins or heat-shrink required.
Only basic tools needed.
Cable Types Single insulated, or double insulated PVC/PVC or PVC/
XLPE copper or aluminium*
Connection ports 2 x 2 in-line ports. Each connector can connect up to 4
cables (of the same phase) to each other.
Contact type Torque controlled insulation piercing shear-head bolts
on all ports.
Test Specification ANSI C119.1
All Piranhas™ are designed for use on low voltage (0.6/1kV) single core cables, or a single
core from a multi-core LV cable. Cable types and ranges are indicative only. Suitability of cable
type and size should be confirmed with Cicame Energie prior to application. Not suitable for
flexible or welding cables.
PHS2X2-4/0-500 B
The PHS2X2-4/0-500 B Piranha™ is a general purpose
multi-port waterproof insulation piercing connector,
ideal for use in wet areas or in areas subject to casual
submersion (i.e. connection pits, hand-holes and manholes).
It will provide parallel in-line waterproof
connection for four single core cables without the need
to strip the cable or apply heat-shrink, resins or gels.