Individual Mats BT & HTA

COMPLIANCE WITH STANDARDS
Insulating mats offer individual and collective protection. In elastomer, they are used to cover the ground for the electrical protection of operators during work or interventions on electrical installations.

They comply with the IEC 61111 standard (live work - Category C electrical insulating mats: resistance to very low temperatures).

MOST:

1- High quality rubber.

2- Non-slip pattern on both sides.

3- Regulatory marking clearly indicating the characteristics of the carpet.

no Référence Tapis

#Parts

Class

AC Voltage

DC Voltage

Thickness (mm)

Dimensions (m)

Weight (Kg)

MP-11/11

0

≤ 1 000 V

≤ 1 500 V

2

1 x 1

2,9

MP-11/16

0

≤ 1 000 V

≤ 1 500 V

2

0,6 x 1

1,4

MP-42/11

3

≤ 26 500 V

≤ 39 750 V

3

1 x 1

4,5

MP-42/16

3

≤ 26 500 V

≤ 39 750 V

3

0,6 x 1

2,9

MP-42/66

3

≤ 26 500 V

≤ 39 750 V

3

0,6 x 0,6

1,8

MP-120/03-1

3

≤ 26 500 V

≤ 39 750 V

3

1,2 x 1

5,8

MP-60/05-1

4

≤ 36 000 V

≤ 54 000 V

5

0,6 x 1

4,4

MP-100/05-1

4

≤ 36 000 V

≤ 54 000 V

5

1 x 1

8,9

MP-120/05-1

4

≤ 36 000 V

≤ 54 000 V

5

1,2 x 1

10,5


Storage / Shipping

Store and transport electrical insulation mats to protect the insulation material. Do not bend the insulating mats. Do not store or use near heat sources. Do not expose them to direct sunlight, artificial light, or other sources of ozone. Storage temperature between 10 ° C and 21 ° C.


Before use


Visually check each face of the carpet before use. If the carpet is soiled, wash it with soap and water and dry it within the temperature range of use.


During use


Operating temperature between -40 ° C and + 55 ° C. Avoid contact of the carpet with chemicals,
solvents or strong acids. Place the carpet on a clean and smooth floor, free of aggressive elements for the insulating material. Position the feet in the center of the insulating mat.

MP-xxx-xxx