AT-10.02N
Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position. 1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model 12-TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 100-S/D Compressor have prefix D. Example: CDA-7, JDA-7, DA-7. Max. size die for Model 12-TON Compressor : CDA-85, CDS-85
AT-10.02N
Data sheet
- Cable Name
- 0.95-584.9 STR
0.95-644.7 STR
0.95-SP-618-22/7
605 kcmil-22/7-STR
666.6 kcmil-42/7 STR
Duck
Eagle
GoldFinch
GrosBeak
Peace AACSR/5005/EHSS
Peace River
Peacock
Rock
Verbena
Waskag - AWG ou KCMIL
- 538.00
556.5
584.90
605.00
618.0
623.80
636.0
644.70
666.6
700 - Nombre de trous de diam. 14,28 de la cosse
- 4
- A (mm)
- 311
- B ( mm )
- 152
- Approx. Weight (Kg)
- 1.4
- Cicame Die
- A-10
- CSA Die
- 32