AT-5.04N
  • AT-5.04N
  • AT-5.04N

AT-5.04N

Start of compression zone is indicated by marking on barrel. Dead-end and jumper terminal pads are each produced with a 15° angle to permit the terminal to be bolted in either the straight or 30° offset position. 1/2-13 UNC galvanized steel bolts, nuts and washers are supplied with each jumper terminal. Jumper terminals are filled with Cicame jointing compound. Dies for Model 12-TON Compresor have prefix CD. Dies for Models J-60 and 60-S/D Compressor have prefix JD. Dies for Model 100-S/D Compressor have prefix D. Example: CDA-7, JDA-7, DA-7. Max. size die for Model 12-TON Compressor : CDA-85, CDS-85
AT-5.04N

Data sheet

AWG ou KCMIL
3/0
A (mm)
179
B ( mm )
89
C (mm)
6.3
D (mm)
27
Approx. Weight (Kg)
0.36
UNC Bolt Size
1/2
Cicame Die
A-5
CSA Die
24