Messenger Clamps
Hot galvanized steel.
The P-38GC is supplied bolt-free and is used to support the bearing wire over short spans.
The P-39GC, P-39CMC and P-8930 clamps are each supplied with two 1/2 round head bolts and two square nuts.
The P-39C ™ has curved ends to prevent damage to the wire in a low-angle installation.
Item P-8930 is used to attach two carrier cables crossing at right angles.
|
#Parts |
Type of clamp |
Monting Hole (in) |
Moulting Bolt (in) |
Length (in) |
Wire Diameter range (in) |
Weight (kg) |
|
P-38GC |
Suspension |
11/16 |
5/8 |
2 1/2 |
1/4 à 7/16 |
0.3 |
|
P-39GC |
Suspension |
11/16 |
5/8 |
5 5/8 |
1/4 à 7/16 |
0.78 |
|
P-39CMC |
Corner |
11/16 |
5/8 |
5 3/4 |
1/4 à 7/16 |
0.95 |
|
P-8930 |
Crossover |
- |
- |
3 1/4 |
1/4 à 7/16 |
0.7 |
P-3xGC - P39CMC - P-8930
Hot galvanized steel.
The P-38GC is supplied bolt-free and is used to support the bearing wire over short spans.
The P-39GC, P-39CMC and P-8930 clamps are each supplied with two 1/2 round head bolts and two square nuts.
The P-39C ™ has curved ends to prevent damage to the wire in a low-angle installation.
Item P-8930 is used to attach two carrier cables crossing at right angles.